OrigenAE Technology
         
 

 


OrigenAE의 IR110은 호환성과 기능성에 있어서 유래 없는 최초의 솔루션입니다.
기존에 상용화된 IR과 다른 내부 USB 헤더를 통해 연결되므로 외장 케이블을 연결할 필요가 없습니다. 또 다른 주요 특징으로는, HTPC의 모든 상태를 리모컨 조작을 통해 제어할 수 있습니다.(단 슬림모드에서는 안됨, OFF이외)
완벽한 MCE 와 호환성을 이루는 VFD의 탁월한 선택이 되었습니다.

 
- 완벽한 MCE 호환성
- X15e 에 내장가능
- 리눅스 드라이버와의 호환성
- 필립스 RC197 리모컨 제공
- 모든 리모컨 호환성
- 스크롤링 디스프레이
- 대기모드시 시계 기능
- 리모컨을 통한 HTPC 온/오프기능
 
아래 링크를 클릭하시면 , VFD 안내책자를 다운로드 받으실수 있습니다 .
IR110 Brochure - PDF 490K





클릭하시면 사용환경에 적합한 모델을 선택할 수 있습니다 .


         
 


제품크기

지원 소프트웨어

소비전력

전원 커넥터

디스플레이 타입

데이터 전송방식

제공 프로그램

수신거리

제공 리모컨



- 100mm X 40mm X 20mm

- MCE (XP & Vista), Linux

- 5V

- 24 to 24 pin ATX thru-cable

- none

- usb header

- irtrans

- 10m (max)

- philips mce remote

 


다운로드는 고객지원 사이트에서 받아가세요.
IR110와 관련된 다운로드는 여기를 클릭하십시요.





 
   
   
모든 스펙은 사전 예고없이 바뀔 수 있습니다.    
     
IRTrans Software architecture

•  The IRTrans System is based on a TCP/IP Client / Server architecture.
Client and Server communicate using the (official) TPC and UDP port 21.000.
•  At the same time (almost) any number of clients can connect to the IRTrans server.
All of them can send and receive.
•  The IRTrans Server can manage 16 busses with 16 devices each = 256 devices.
•  Using the TCP/IP structure it is possible to access the system from anywhere (using Internet / Intranet connections).
TCP/IP Netmasks allow to limit the access to the server to certain IP addresses.
•  The Client/Server Software is Open Source and runs on Windows and LINUX using a Single Sourcecode concept.
•  The server completely controls the learn process for IR codes. They are stored in a central database compromised of ASCII files. Addressing of the devices in a multizone systems is controlled by the server, too.
•  In addition to the IRTrans socket interface the server also has a LIRC / WinLIRC compatible interface.


Application interface

Due to the flexible Opensource architecture of the IRTrans System and the TCP/IP server the system can easily be adapted to different applications. Each plugin connects to the IRTrans server. This has got several advantages: The majority of the code has got to be implemented only once - in the IRTrans server. Furthermore almost any number of clients can connect to the server and use the system at the same time. Because of the TCP/IP connection client and server can run on different systems that can connect over the internet. These systems can even be installed on different operating systems.

Applications not mentioned here can mostly be controlled through Girder. The list of supported programs is constantly growing.


Windows Software

•  Girder. IRTrans has got a full featured Girder plug-in. It not only allows to control the PC but can also learn and send commands and control an LCD display connected to the IRTrans System.
Furthermore Girder can be used to control lots of other applications and can therefore also be used as an universal interface to control applications.
•  Meedio / Sceneo. Meedio and the related Sceneo werden are supported through an IRTrans Plugin. It also supports controlling the display and sending of IR codes.
•  WinLIRC. The IRTrans System is compatible with LIRC and WinLIRC. That means all clients with LIRC or WinLIRC interfaces can be used with the IRTrans system. LIRC or WinLIRC do not need to be installed. As the LIRC / WinLIRC interface is part of the IRTrans server no additional software is needed.
•  myHTPC. IRTrans can be used with the WinLIRC setting of myHTPC. No driver or plug-in is needed.
•  IP-Symcon comes with an integrated plugin for IRTrans.
•  HIP supports the IRTrans system with an integrated plugin.
•  V8tech MMC has builtin support for the IRTrans System.
•  HomeSeer is supported using a plug-in that is supplied with the IRTrans Software. It allows receiving, learning and sending of IR codes
•  LCDHype. A driver for the Windows LCD Software LCDHype is supplied with the system. That way the VFD display can be programmed freely.
•  Microsoft Mediaplayer. The Microsoft Mediaplayer can be controlled using a remote control. Furthermore the current track information is displayed on the VFD display.


Linux Support

•  LIRC. The IRTrans System is compatible with LIRC and WinLIRC. That means all clients with LIRC or WinLIRC interfaces can be used with the IRTrans system. LIRC or WinLIRC do not need to be installed. As the LIRC / WinLIRC interface is part of the IRTrans server no additional software is needed.
•  VDR can be controlled using the LIRC interface of IRTrans.
•  MisterHouse is supported through the xAP interface of the IRTrans server.
•  lcdproc. A driver for the LINUX LCD software lcdproc is shipped with the system



Program interfaces und standard plugins

•  LIRC and WinLIRC: All applications with LIRC or WinLIRC interface can be used with the IRTrans system.
•  xAP: The xAP interface is a standard feature of the irserver.
•  Active-X: The Active-X Plug-in allows to write own programms in all languages that support Active-X. To send commands only 5-10 lines of code are needed. Of course learning and receiving is also supported.
•  C DLL: The "C" DLL makes integration of IRTrans in own "C" programs very easy.
•  .NET DLL: Die .NET managed DLL allows to use the IRTrans System with all Managed .NET programming languages (C++, C#, VB). That way it is very easy to add an infrared interface to .NET projects.



For more information on IRTrans please visit www.irtrans.com

 

       
 
Copyright © 2005-2013 OrigenAE Technology. All rights reserved